1.1.2. Vel2Grid3D - velocity model description to 3D model grid

Given an existing 3D velocity model defined by interpolation between control point nodes and created by velocity inversion programs such as SimulPS, Simul2000 and FDTomo to a 3D model grid. (outputs a 3D Grid) , Vel2Grid3D generates a 3D model Grid header and buffer files containing velocities, slownesses or other model specification.

`Overview <#_overview_>`__ - `Running the program-Input <#_running_>`__ - `Output <#_output_>`__ - `Processing and Display of results <#_processing_>`__ - [NonLinLoc Home]

1.1.2.1. Overview

The Vel2Grid3D program converts an existing 3D velocity model defined by interpolation between control point nodes and created by velocity inversion programs such as SimulPS, Simul2000 and FDTomo into a `3D Grid <formats.html#_grid_>`__ file containing velocity or slowness values.

The Vel2Grid3D program uses a “flat earth”, rectangular, left-handed, x,y,z,t coordinate system (positive X = East, positive Y = North, positive Z = down). Distance units are kilometers.

Important note:

Because of there are many variations of the SimulPS, Simul2000 and FDTomo type model formats, it is necessary to edit the Vel2Grid3D.c source code to select a specific sub-format using C #define statements.
The current options are:

1. default, early SimulPs format with %5f (fixed width) format for reading velocity values and right-handed, East-negative coordinate system

2. Zhang %7f (fixed width) format for reading velocity values and left-handed, East-positive coordinate system

3. ETH format (*f variable width, space delimited) for reading velocity values

  1. A left-handed, East-positive coordinate system

1.1.2.2. Running the program - Input

Synopsis: Vel2Grid3D3DInputControlFile

The Vel2Grid3D program takes a single argument InputControlFilewhich specifies the complete path and filename for an Input Control File with certain required and optional statements specifying program parameters and input/output file names and locations. See the `Vel2Grid3D Statements section <control.html#_Vel2Grid3D_>`__ of the Input Control File for more details. Note that to run Vel2Grid3D the `Generic Statements section <control.html#_generic_>`__ of the Input Control File must contain the CONTROL and TRANS(Geographic Transformation) statements.

In addition, the Vel2Grid3D program requires a set of `Vel2Grid Statements <control.html#_Vel2Grid_>`__ and `Vel2Grid3D Statements <control.html#_Vel2Grid3D_>`__ in the Input Control File:

#. #.

1.1.2.3. Output

The velocity or slowness values throughout the requested grid are written to a new `3D Grid File <formats.html#_grid_>`__. For a description of the naming convention for these grid files, see the VGOUT statement in the Vel2Grid Statements section of the Input Control File.

1.1.2.4. Processing and Display of results

The 3D model grids can be post-processed with the program Grid2GMT to produce a GMT command script for plotting with the GMT plotting package.

Back to the NonLinLoc site Home page.

Anthony Lomax